I need a manual transmission that will bolt up to a 350 small block chevy engine-high performance…any sugges

Look into the T56. It is a very sturdy and very popular transmission. This is probably what i’m going to put into my chevelle.

well a 4 speed or a 5 speed or a 6 speed will work. Hell a Ford Top Loader will work with the proper bell housing.

Tracy, why? An automatic is quicker on the fly than a manual with a clutch. Check out Car & Driver and Road & Trck for stats all the way back to the 70′s

What kinda manual exactly 4, 5,or 6 speed? Depending on your rear gear ratio and rpm range & overall tourque. I would HIGHLY recommend the Richmond 5&6 speeds. It gives you the ability to run a serious gear ratio (4.10:1 and 4.56:1) on the street/strip, and still hit 150 plus on the highway! However depending on your budget the Richmond T-10 and T-10 plus are both “bang for the buck” bulletproof transmissions that can withstand the rigers of the track and pull out of your driveway for work everyday. Both are quality products by a quality company. My personal favorite however is the Muncie 4speed “ROCKCRUSHER” good luck finding one. Also in the Muncie family is the ever rare and unique Super Muncie, all those Corvette Guys know what I’m speaking of. If you come up lucky at a swap meet and spot either one of these gems SNATCH IT UP QUICK! Good luck and GREAT RACING!!!!
email me if you have any other questions fellow “Bowtie”

dont know what year you are dealing with but all the older chevy bell housing to the engine are the same bolt pattern. from the 6 cyl , 350-s 400-s 396 and 454, 427 all bolt up to the same bell housing, just some different flywheels. a muncie 4 speed is one of the best ones to get ahold of and will preform for you good. good luck

try t56 that’s a good one,